Welcome, Guest. Please Login or Register.
Oct 3rd, 2007, 9:16am

Home Home Help Help Search Search Members Members Login Login Register Register
Timex Sinclair 1000 - ZX81 Artic Assembler Documentation Wanted

   Timex Sinclair 1000 - ZX81
   Software Discussions
   Programming 101
(Moderator: Bill H)
   Artic Assembler Documentation Wanted
« Previous topic | Next topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Send Topic Send Topic Print Print
   Author  Topic: Artic Assembler Documentation Wanted  (Read 101 times)
YaBB Newbie

TS1000 Forever!


Gender: male
Posts: 29
Artic Assembler Documentation Wanted
« on: Jul 20th, 2006, 8:34pm »
Quote Quote Modify Modify

I'm looking for any documents or information on how to run the Artic Assembler. I spent hours after graduating college on the TS1000 using Artic but I've lost the manual a long time ago. My parents thought I was wasting my time on it but a couple of years ago I got an Electrical Engineer/Computer Programming job and what won my employer over was that I knew Z80 assembly which they used on a datalogging machine they made!
IP Logged

Timex Sinclair 1000 Lives On!!!
YaBB Full Member

member of the ZX-Team (www.zx81.de)


Gender: male
Posts: 217
Re: Artic Assembler Documentation Wanted
« Reply #1 on: Jul 21st, 2006, 7:15am »
Quote Quote Modify Modify

if you are talking about this assembler giving the startup message:
   <<<< ZX - ASSEMBLER 2 >>>>
the following short instruction may help:
      * ZX-Assembler-2, revised version by Carlo Delhez, 1991
      * rewritten version of this excellent Assembler, machine coded
      * this version resides in line 0; the source code is stored
   in line 2, the object code in line 1
      * Type  LET OC=USR 16516  then assemble your source and quit;
   on return, OC holds the start address of the object code
      * ORG directive is added; use COPY option after assembly
      * use ORG +16516 and remove line 0 to get proper `1 REM' code
      * more extensive manual available on request
      * most options can be quitted by pressing Q or Shift-Q
      * exit assembler by pressing Q twice at main prompt
« Last Edit: Jul 21st, 2006, 7:17am by siggi » IP Logged
Pages: 1  Reply Reply Notify of replies Notify of replies Send Topic Send Topic Print Print

« Previous topic | Next topic »

Timex Sinclair 1000 - ZX81 » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB 2000-2003. All Rights Reserved.